Echelon LonMaker - Manual (Page 356)

340 Appendix A - Setting LonMaker Default Options
will not be stored in the device.
Scope: Current network, all LonMaker computers
Set Location Property
to Subsystem ID Stores the subsystem ID in the location field of an application device
and router when the device is commissioned . Automatically updates
the subsystem ID in the location field when the application device or
router is moved or its subsystem is moved or renamed (provided that
the
Update all Devices when Subsystem Name is Modified option
is set to Yes ), or you select the Update Location Path and ID in
Devices check box in the Synchronize LonMaker Drawing dialog.
This check box is selected by default.
The subsystem ID is the first 15 bits of the LNS subsystem handle
(in a very large network, with many subsystems where more than
32767 subsystems have been created and deleted this could result in
multiple unique subsystems having the same ID).
Scope: Current network, all LonMaker computers
Update all Devices
when Subsystem Name
is Modified Select whether the LonMaker tool updates the SCPTlocation
configuration property and location field in an application device or
router when the path or ID of its subsystem changes. You have three
choices:
• No. Devices are not updated. You will need to resynchronize
your LonMaker drawing to update devices with the current
subsystem path and ID.
• Yes. Application devices and routers are automatically updated
to reflect the new subsystem path or ID.
• Ask. The LonMaker tool will prompt you whether to update
devices. This is the default.
Scope: Current network, all LonMaker computers