Appendix b - installing network interfaces – Echelon LonMaker User Manual
Page 363
LonMaker User’s Guide
347
Appendix B - Installing Network
Interfaces
You can use any compatible IP or LNS network interface with the LonMaker tool.
Compatible network interfaces include the
i
.LON 10 and
i
.LON 100 IP interfaces, U10
and U20 USB interfaces, PCC-10 PC Card, PCLTA-20 and 21 PCI Cards, SLTA-10
Serial LonTalk Adapter, and an Ethernet card used with an
i
.LON 100 with IP-852
routing or an
i
.LON 600 router. This appendix explains how to install the hardware for
and configure the PCLTA-10, PCLTA-20, and PCC-10 network interfaces. If you are
using one of the other network interfaces, see the documentation for the network interface
for installation instructions.