Dell POWEREDGE M1000E - Manual (Page 981)

Fabric OS Command Reference 949
53-1001764-02
syslogdIpShow
2
syslogdIpShow
Displays all syslog daemon IP addresses.
Synopsis syslogdipshow
Description Displays the list of servers that are running the syslogd daemon and to which system messages are
sent. Servers are specified in the configuration database by IP address. IPv4 and IPv6 addresses
are supported.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display all syslog daemon IP addresses configured on a switch:
switch:admin>
syslogdipshow
syslog.1 1080::8:800:200C:417A
See Also errShow, syslogdFacility, syslogdIpAdd, syslogdIpRemove