Dell POWEREDGE M1000E - Manual (Page 304)

272 Fabric OS Command Reference
53-1001764-02
fcpLogEnable
2
fcpLogEnable
Enables the FCPD debug information log (debug command).
Synopsis fcplogenable
Description Use this command to enable Fibre Channel Protocol daemon (FCPD) logging. Debug information
logging is enabled by default.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To enable the FCPD debug information log:
switch:admin>
fcplogenable
See Also fcpLogClear, fcpLogDisable, fcpLogShow