Dell POWEREDGE M1000E - Manual (Page 195)

Fabric OS Command Reference 163
53-1001764-02
cryptoCfg
2
cryptocfg --modify -LUN crypto_target_container_name LUN_Num initiator_PWWN
[-encryption_format native | DF_compatible]
[-encrypt | -cleartext]
[-enable_encexistingdata | -disable_encexistingdata]
[-enablerekey time_period | -disable_rekey]
cryptocfg --remove -LUN crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --enable -LUN crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --create -tapepool -label pool_label | -num pool_num
[-encryption_format native | DF_compatible]
[-encrypt | -cleartext]
[-key_lifespan time_in_days | none]
cryptocfg --delete -tapepool -label pool_label | -num pool_num
cryptocfg --modify -tapepool -label pool_label | -num pool_num
[-encryption_format native | DF_compatible]
[-encrypt | -cleartext]
cryptocfg --manual_rekey crypto_target_container_name LUN_Num initiator_PWWN
[-include_mirror]
cryptocfg --manual_rekey -all [-include_mirror]
cryptocfg --resume_rekey crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --discoverLUN crypto_target_container_name
cryptocfg --show -container -all -cfg | -stat
cryptocfg --show -container crypto_target_container_name -cfg | -stat
cryptocfg --show -tapepool -all | -label pool_label |-num pool_num -cfg | -stat
cryptocfg --show -LUN crypto_target_container_name LUN_Num initiator_PWWN -cfg | -stat
cryptocfg --show -rekey -all
cryptocfg --show -rekey crypto_target_container_name
cryptocfg --show -rekey crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --show -tape_sessions -all
cryptocfg --show -tape_sessions crypto_target_container_name
cryptocfg --clearstats -container [-all | crypto_target_container_name ]
cryptocfg --clearstats -LUN crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --refreshDEK crypto_target_container_name LUN_Num initiator_PWWN
Description Use these cryptoCfg commands to configure and manage tape or disk devices that store the
encrypted and compressed data.
A CryptoTarget container (CTC) is a configuration of “virtual devices” that is created for each target
port hosted on a Brocade Encryption Switch or FS8-18 blade. The container holds the configuration
information for a single target, including associated hosts and LUN settings. A CryptoTarget
container interfaces between the encryption engine, the external storage devices (targets), and the
initiators (hosts) that can access the storage devices through the target ports.