Dell POWEREDGE M1000E - Manual (Page 794)

762 Fabric OS Command Reference
53-1001764-02
portShow
2
To display IPSec parameters on an IPSec-enabled tunnel:
switch:admin>
portshow fciptunnel 17 -i
-------------------------------------------
Tunnel ID: 17
Tunnel Description:
Admin Status: Enabled
Oper Status: Empty
Compression: Off
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Enabled
IPSec Key: '01234567890123456789012345678901'
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:c3:f0:16
Peer WWN: 00:00:00:00:00:00:00:00
Circuit Count: 0
Flags: 0x00000000
FICON: Off
To display the FCIP tunnel hierarchy on the Brocade FX8-24:
switch:admin>
portshow fciptunnel 7/12--hier
FCIP Tunnel 7/12
| High Level Tunnel Stats:
| Operational Status: Up
| Connected Count: 13
| Max Comm Rate: 1000000
| Compression Ratio: 1 : 1
| Compressed Bytes: 0
| Uncompressed Bytes: 0
| Bytes In: 890228
| Bytes In Avg: 17
| Bytes Out: 1084796
| Bytes Out Avg: 26
| Packets In: 7659
| Packets In Avg: 0
| Packets Out: 7659
| Packets Out Avg: 0
| Aggregate TCP Stats:
| TCP Bytes In: 13183116
| TCP Bytes Out: 31193164
| TCP Packets In: 449744
| TCP Packets Out: 450000
| Retransmits: 236
| Longest RTT: 0 ms
| Out Of Sequence: 0
| Slow Starts: 0
| Circuit Count: 1
| TCP Count: 4
| Circuits:
|--> Circuit 7/12.0
| High Level Circuit Stats:
| Operational Status: Up
| Connected Count: 13
| Max Comm Rate: 1000000
| Bytes In: 890228
| Bytes In Avg: 17
| Bytes Out: 1084796