Cfgdisable – Dell POWEREDGE M1000E User Manual

Page 123

Fabric OS Command Reference

53-1001764-02

cfgDisable

Disables a zone configuration.

Synopsis

cfgdisable

Description

Use this command to disable the current zone configuration. The fabric returns to non-zoning
mode, in which all devices see each other.

This command ends and commits the current zoning transaction buffer to both volatile and
nonvolatile memory. If a transaction is open on a different switch in the fabric when this command
is run, the transaction on the other switch is automatically aborted. A message displays on the
other switches to indicate that the transaction was aborted.

If the default zone access mode is “No Access”, then this command becomes cfgEnable
“d_efault_Cfg”. Refer to defZone help for zone access configuration.

Notes

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands

none

Examples

To disable the current zone configuration:

switch:admin>

cfgdisable

You are about to disable zoning configuration. This

action will disable any previous zoning configuration enabled.

Do you want to disable zoning configuration? (yes, y, no, n): [no]