Dell POWEREDGE M1000E - Manual (Page 781)

Fabric OS Command Reference 749
53-1001764-02
portShow
2
To display the state of a VE_Port on a chassis with an FX8-24 blade:
switch:admin>
portshow 7/12
portIndex: 140
portName:
portHealth: No Fabric Watch License
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x490b PRESENT ACTIVE VIRTUAL E_PORT G_PORT U_PORT
LOGICAL_ONLINE LOGIN LED
portType: 12.0
portState: 1 Online
Protocol: FC
portPhys: 255 N/A portScn: 16 E_Port
port generation number: 1048
state transition count: 26
portId: 018c00
portIfId: 43720806
portWwn: 20:8c:00:05:1e:7a:7a:00
portWwn of device(s) connected:
Distance: normal
switch:admin>
To display port status for a GbE port on a Brocade 7800:
switch:admin>
portshow ge2
Eth Mac Address: 00.05.1e.54.b1.17
Port State: 1 Online
Port Phys: 6 In_Sync
Port Flags: 0x4003 PRESENT ACTIVE LED
Port Speed: 1G
To view xlate domains, you must issue the command on a Brocade 7500/7500E or a chassis with
an FR4-18i blade. Note that the Front Domain ID is what is shown:
switch:admin> portshow 8/4
portName:
portHealth: No Fabric Watch License
Authentication: None
EX_Port Mode: Enabled
Fabric ID: 20
Front Phantom: State: OK
Cur Dom ID: 160 WWN: 50:00:51:e3:60:ee:0e:14
Pr Switch Info: Dom ID: 5
WWN: 10:00:00:05:1e:34:02:04
Fabric params: R_A_TOV: 10000 E_D_TOV: 2000 PID fmt: core
Authentication Type: None
Hash Algorithm: N/A
DH Group: N/A
Edge fabric's primary wwn: N/A
Edge fabric's version stamp: N/A
portDisableReason: None