Dell POWEREDGE M1000E - Manual (Page 785)

Fabric OS Command Reference 753
53-1001764-02
portShow
2
To display the ARP tables on the Brocade 7800:
switch:admin>
portshow arp ge0
Port: ge0
IP Address Mac Address Flags
------------------------------------------------------
192.168.0.10 00:05:1e:c3:f0:1a Resolved
192.168.0.11 00:05:1e:c3:f0:1a Resolved
192.168.0.250 00:00:00:00:00:00
2000::10 00:05:1e:c3:f0:1a Resolved
2000::11 00:05:1e:c3:f0:1a Resolved
2000::1:250 00:00:00:00:00:00
switch:admin>
portshow arp ge5
No Arp Entries found
To show the ARP entries with local MAC address for a GbE port on the Brocade 7500:
switch:admin> portshow arp 12/ge0 -lmac
Port: ge0
Local MAC Address: 00:05:1e:35:1e:e5
IP Address Mac Address Flags
------------------------------------------------------
192.168.15.20 00:05:1e:37:0f:a5 Permanent Resolved
To display the VLAN tagging configurations on a Brocade 7800:
switch:admin> portshow vlantag ge0
Port: ge0
Interface Address VlanId L2CoS Flags
Destination Address
-------------------------------------------------------------
192.168.2.10 200 5 Perm Net
0.0.0.0
192.168.0.20 100 0 Perm
192.168.0.10
192.168.0.21 200 0 Perm
192.168.0.11
2000::20 300 0 Perm
2000::10
2000::21 400 0 Perm
2000::11
Function Commands supported only on the Brocade 7800 and the Brocade FX8-24
Synopsis portshow option [ all |[slot]ve_port]] arguments [optional_arguments]
Description Use this command to display configuration parameters and status information for FCIP tunnels and
FCIP circuits on the GbE/10GbE ports on the Brocade 7800 and FX8-24 platforms. The FCIP
tunnels on the local and remote GbE ports act as Virtual E_Ports (VE_Ports) connecting the local
and remote fabrics. The following display options are supported on these platforms:
• portShow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnels including the following:
- Additional performance information