Dell POWEREDGE M1000E User Manual
Page 162
130
Fabric OS Command Reference
53-1001764-02
configUpload
2
“passwd”
Specifies the account password when you use the FTP protocol. Quotation
marks are optional.
-local
Uploads a specified configuration file to a predetermined directory on the
local chassis. This option requires a file name.
-USB | -U
Uploads a specified configuration file to a predetermined directory on an
attached USB device. This option requires a file name.
“file”
Specifies the file name. Quotation marks are optional. This parameter is valid
only with the -local or -USB options, each of which stores files in a
predetermined directory on the local chassis or on an attached USB device.
Therefore, subdirectories and absolute path names are not permitted.
-force
Overwrites an existing file without confirmation. This parameter is valid only
with the -local or -USB options.
When invoked without operands or without “host” or “file” parameters, configUpload runs in
interactive mode. When invoked without any of the parameters -all, -fid, or -chassis, only the switch
configuration for the current logical switch is uploaded.
Examples
To upload the switch configuration interactively from a switch that is not enabled for Virtual Fabrics:
switch:admin>
configupload
Protocol (scp, ftp, local) [ftp]:
Server Name or IP Address [host]:
192.168.38.245
User Name [user]:
jdoe
File Name [
Password:
configUpload complete: All config parameters are uploaded
To upload the switch configuration that belongs to a logical switch with FID 100:
switch:admin>
configupload
Protocol (scp, ftp, local) [ftp]:
Server Name or IP Address [host]:
10.32.220.100
User Name [user]:
jdoe
File Name [
config.fid100.txt
Section (all|chassis|FID# [all]):
100
Password:
configUpload complete: All config parameters are uploaded
To upload the configuration for the entire chassis to a local file from the command line forcing an
overwrite:
switch:admin>
configupload -chassis -local -force config.txt
configUpload complete: All config parameters are uploaded
To upload the configuration for the current logical switch to an external FTP server:
switch:admin>
configupload -ftp 192.168.38.245,jdoe,config.txt,password
To upload all system configuration data to an external FTP server:
switch:admin>
configupload -all -ftp 192.168.38.245,jdoe,config.txt,password