Dell POWEREDGE M1000E - Manual (Page 994)

962 Fabric OS Command Reference
53-1001764-02
thConfig
2
email Event triggers an e-mail.
poortlog Event triggers a port log entry
none Event triggers no action.
-buffer value Specifies the buffer value for in range behavior. A buffer defines a zone within
which event criteria are met, rather than a single threshold value. This
operand is valid only with the -trigger options.
-nosave Prevents the configuration changes from being saved persistently. This option
allows you to make and view changes without overwriting the saved
configuration. When you use --set with the -nosave option and the switch
reboots your changes will be lost.
--
apply Applies the custom or default configuration for thresholds, actions, or both.
This command allows you to toggle between custom and default settings. The
specified configuration takes effect upon execution of this command. When
you select custom, the saved configuration becomes effective. You must
specify a class and an area when applying a configuration.
--
cancel Cancels a nonpersistent custom configuration. This command effectively
undoes the -nosave operation without reboot. You must specify a class and
an area with this command. Thresholds and alarm levels are optional; if
omitted, all nonpersistent configurations for the specified class and area are
canceled.
--
show Displays the threshold configuration or run-time status for all configured
classes and areas. You can optionally specify a class to display the threshold
for all areas in that class. Or you can specify an a class and an area to display
the area-specific configuration only. When issued without operands, this
command displays all configured thresholds for all Fabric Watch classes.
The following operand a are optional and valid only with the --show option.
-current_status
Displays current values for a specified class and area, as registered by Fabric
Watch, or for all port types and areas. The output includes the class, area,
port number, circuit number if applicable, current value, and Fabric Watch
State. he State field reports whether the current value is above, in range, or
below (info) the configured threshold.
-only_area Displays a comprehensive listing of all valid Fabric Watch classes and
associated areas. If a class is provided, this command displays the areas of
the specified class.
The following operands are optional with the --apply, --cancel, and --show
options; if omitted, defaults are used.
-thresh_level def | cust
Configures or displays default or custom threshold configuration settings.
-action_level def | cust
Configures or displays default or custom configuration settings.
--
help Displays the command usage.