Dell POWEREDGE M1000E - Manual (Page 422)

390 Fabric OS Command Reference
53-1001764-02
haShow
2
Operands none
Examples To display CP status on a Brocade 48000, first on a healthy standby CP and then on a faulty
standby CP:
switch:admin>
hashow
Local CP (Slot 6, CP1): Active, Cold Recovered
Remote CP (Slot 5, CP0): Non-Redundant
switch:admin> hashow
Local CP (Slot 6, CP1): Active, Warm Recovered
Remote CP (Slot 5, CP0): Standby, Failed
Backplane PCI fail, severity: CRITICAL
HA enabled, Heartbeat Up, HA State not in sync
To display CP status on a Brocade DCX with a healthy standby CP:
switch:admin>
hashow
Local CP (Slot 7, CP1) : Active, Cold Recovered
Remote CP (Slot 6, CP0) : Standby, Healthy
HA Enabled, Heartbeat Up, HA State Synchronized
See Also haDisable, haEnable, haFailover