beautypg.com

Portlogdump – Dell POWEREDGE M1000E User Manual

Page 746

background image

714

Fabric OS Command Reference

53-1001764-02

portLogDump

2

portLogDump

Displays the port log without page breaks.

Synopsis

portlogdump [count[, saved]]

Description

Use this command to display the port log, listing all entries in the log without page breaks. This
command displays the same information as portLogShow, but portLogShow prompts you to press
Enter between each page.

For an explanation of the information displayed by this command, refer to the portLogShow
command.

If the port log is disabled while this command is executed, a warning message is displayed. Refer to
the portLogClear command for more information.

Notes

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability
" for details.

Operands

This command has the following operands:

count

Specifies the maximum number of lines to be displayed. Only the most recent
count entries are displayed. This operand is optional.

saved

Specify a nonzero value to display the saved port log from the last switch
fault. Refer to upTime for conditions that cause a fault. The operand count is
ignored when displaying the saved log. This operand is optional.

Examples

To display 10lines of the portlog on a Brocade DCX:

switch:user>

portlogdump 10

time task event port cmd args

-------------------------------------------------

Mon Nov 16 21:52:15 2009

21:52:15.214 FCPH seq 106 7f0

ed210000,00000000,000073ee,10010082,00008000

21:52:15.214 PORT Tx3 106 2032 02fffffd,00fffffd,0701ffff,13010000

21:52:15.216 FCPH read 106 2032

03fffffd,00fffffd,00000000,00008000,07010000

21:52:15.216 FCPH seq 106 7f0

ed980000,07010000,00004143,0004001c,00008000

21:52:15.216 FCPH write 106 2032

00fffffd,00fffffd,00000000,00008000,00000000

21:52:15.216 FCPH seq 106 7f0

ed210000,00000000,000073ee,10010082,00008000

21:52:15.216 PORT Tx3 106 2032 02fffffd,00fffffd,06feffff,13010000

21:52:15.218 FCPH read 106 2032

03fffffd,00fffffd,00000000,00008000,06fe0000

21:52:15.218 FCPH seq 106 7f0

ed980000,06fe0000,00004143,0004001c,00008000

21:52:15.220 FCPH seq 106 7f0

ed980000,06fc0000,00004143,0004001c,00008000

switch:admin>

See Also

portLogClear, portLogShow, upTime