Fcrfabricshow – Dell POWEREDGE M1000E User Manual
Page 315
Fabric OS Command Reference
283
53-1001764-02
fcrFabricShow
2
fcrFabricShow
Displays the FC Routers on a backbone fabric.
Synopsis
fcrfabricshow
Description
Use this command to display information about FC Routers that exist in an FC Router backbone
fabric. The existing syntax is maintained for IPv6 support. When IPv6 addresses are not configured,
the output of fcrFabricShow displays the IPv4 format.
The message "No active FC Routers found" is displayed if no active FC Routers are present on the
backbone fabric.
The following information is displayed for each FC Router found on the backbone fabric:
WWN
The world wide name of the FC Router.
Domain ID
The domain ID of the FC Router. This domain ID is relevant only on the
backbone fabric.
Info
The Ethernet IP address and switch name of the FC Router. When IPv6
addresses are configured, only the static IP address displays for each FC
router found on the backbone fabric.
EX_Ports
A listing of active EX_Ports for the FC Router and information about these
EX_Ports. This information includes:
EX_Port
The port number for the EX_Port. An asterisk (*) at the end of the line
indicates that the EX_Port is a Remote Router Port.
FID
The fabric ID of the EX_Port.
Neighbor Switch Info
(WWN, enet IP, name) The WWN, Ethernet IP address, and switch name of the
switch attached to the EX_Port.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
none
Examples
To display the FC Routers in the backbone fabric:
switch:admin>
fcrfabricshow
FC Router WWN: 10:00:00:05:1e:41:59:81, Dom ID: 2,
Info: 10.33.36.8, "swd77"
EX_Port FID Neighbor Switch Info (enet IP, WWN, name)
------------------------------------------------------------------------
12 5 10.33.35.81 10:00:00:05:1e:34:01:d0 "B10_4"
FC Router WWN: 10:00:00:05:1e:41:1c:73, Dom ID: 4,
Info: 10.33.36.12, "ttv12"
EX_Port FID Neighbor Switch Info (enet IP, WWN, name)
------------------------------------------------------------------------
9 2 10.33.35.80 10:00:00:05:1e:38:01:e7 "B10_3"
10 2 10.33.35.80 10:00:00:05:1e:38:01:e7 "B10_3"