Msplmgmtactivate – Dell POWEREDGE M1000E User Manual

Page 545

Fabric OS Command Reference

513

53-1001764-02

msPlMgmtActivate

Activates the Management Server (MS) platform service.

Synopsis

msplmgmtactivate

Description

Use this command to activate the MS platform service throughout the fabric. This command
attempts to activate the MS platform service for each switch in the fabric. The change takes effect
immediately and is committed to the configuration database of each affected switch. MS activation
is persistent across power cycles and reboots.

Notes

By default, the MS platform service is disabled.

Before issuing this command, run msCapabilityShow to verify that all switches in the fabric support
the MS platform service; if one switch does not support the service, the command fails.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

This command is supported only in AD0 and AD255 contexts.

Operands

none

Examples

To activate the MS platform service:

switch:admin>

msplmgmtactivate

Request to activate MS Platform Service in progress......

*Completed activating MS Platform Service in the fabric!