Dell POWEREDGE M1000E - Manual (Page 212)

180 Fabric OS Command Reference
53-1001764-02
cryptoCfg
2
-all Displays runtime information for all tape sessions in progress on the local
node.
crypto_target_container_name
Displays runtime information for all tape sessions in progress for a specified
CryptoTarget container.
--
clearstats -container
Clears compressed or uncompressed blocks and/or byte counters for the
specified containers. Specify one of the following operands:
-all Clears blocks and/or byte counters for all CryptoTarget tape containers.
crypto_target_container_name
Clears blocks and/or byte counters for all CryptoLUNs of the specified
CryptoTarget tape container.
--
clearstats -LUN Clears compressed or uncompressed blocks and/or byte counters for a
specific CryptoLUN. The following operands are required:
crypto_target_container_name
Specifies the CryptoTarget tape container for the LUN.
LUN_Num Specifies the number of the LUN to be cleared.
initiator_PWWN Specifies the initiator port WWN for the specified LUN.
--
refreshDEK Rereads the mirror LUN metadata and updates the FPGA tables for the LUN if
the keyID in the metadata has changed. You must issue this command on the
node of the EE where the container that includes the mirror LUN is hosted. An
RSA RKM must be configured for the encryption group and replication mode
must be enabled for this command to succeed. This command fails if the
specified LUN was not added with -newLUN option. The refresh operation may
cause a brief disruption of the host I/O. The following operands are required:
crypto_target_container_name
Specifies the CryptoTarget container for the LUN.
LUN_Num Specifies the number of the LUN whose metadata needs to be reread.
initiator_PWWN Specifies the initiator port WWN for the specified LUN.
Function 5. Transaction management
Synopsis cryptocfg --help transcfg
cryptocfg --commit [-force]
cryptocfg --transabort transaction_ID
cryptocfg --transshow
Description Use these cryptoCfg commands to manage the transaction mechanism for those functions that
require configuration changes to be committed before they take effect. These functions include
“3. High Availability (HA) cluster configuration” and “4. Storage device configuration and
management”
Transaction commands must be invoked on the group leader.