Dell POWEREDGE M1000E - Manual (Page 344)

312 Fabric OS Command Reference
53-1001764-02
fdmiCacheShow
2
fdmiCacheShow
Displays abbreviated remote FDMI device information, according to remote domain ID.
Synopsis fdmicacheshow
Description Use this command to display FDMI cache information for remote domains only.
The state of each remote domain, identified by its domain ID, is shown to be unknown, known,
unsupported, or error.
The revision of the switch also displays, followed by the world wide name of the switch.
For HBAs, only the HBA identifiers and registered port lists are displayed. No detailed HBA
attributes are displayed. For registered ports, only port identifier and corresponding HBA are
shown; no detailed port attributes are displayed.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, “Using Fabric OS commands” and Appendix A, “Command
Availability” for details.
Operands none
Examples To display the FDMI cache:
switch:admin>
fdmicacheshow
Switch entry for domain 3
state: known
version: v310
wwn: 10:00:00:60:69:90:03:c7
HBAs:
10:00:00:00:c9:25:9b:96
Ports: 1
10:00:00:00:c9:25:9b:96
Total count of devices on the switch is 1
See Also fdmiShow