Dell POWEREDGE M1000E User Manual
Page 814

782
Fabric OS Command Reference
53-1001764-02
portShow
2
FCIP RTT Variance = 1 ms
FC control traffic TCP connection:
Local 192.168.32.1:4129, Remote 192.168.32.2:3225
Data transfer TCP connection:
Local 192.168.32.1:4130, Remote 192.168.32.2:3226
To display FICON EPCB for a GbE port 0 tunnel ID 1 with post display clearing of relevant statistics:
switch:admin>
portshow ficon ge0 1 -epcb -clear
To display a list of discovered devices and selected path and status information on each. Get the
adrs from this display for the next command:
switch:admin>
portshow ficon ge0 all -fdcb
To display details on the FDCB specified in the adrs argument, which was derived from the previous
example:
switch:admin>
portshow ficon ge0 all -fdcb 10008000
To display the same information as the previous example but with post display clearing of relevant
statistics:
switch:admin>
portshow ficon ge0 all -fdcb 10008000 -clear
To display the inband management interfaces configured on the Brocade 7500:
switch:admin>
portshow inbandmgmt ge1
Port: ge1
Inband Management: Enabled
CP Interface IP Address NetMask MTU
----------------------------------------------
0 192.168.255.1 255.255.255.252 1500
GE Interface IP Address NetMask MTU
----------------------------------------------
0 192.168.255.2 255.255.255.252 1500
To display the routes that use internal management interfaces.
switch:admin>
portshow iproute ge1
Port: ge1
IP Address Mask Gateway Metric
-----------------------------------------------------
192.168.112.0 255.255.255.0 192.168.112.61 0 Interface
192.168.255.0 255.255.255.0 192.168.255.2 0 Interface Management
10.1.1.61 255.255.255.255 192.168.255.1 0 Management
192.168.102.0 255.255.255.0 192.168.112.1 0
192.168.106.0 255.255.255.0 192.168.112.1 0
192.168.255.0 255.255.255.0 192.168.255.1 0 Interface Management
192.168.112.60 255.255.255.255 192.168.255.2 0 Management
IPv6 Address Len Gateway Metric
----------------------------------------------------------------------------
See Also
authUtil, portCfg, portLoginShow, portCfgLongDistance, portName, switchShow