Dell POWEREDGE M1000E - Manual (Page 700)

668 Fabric OS Command Reference
53-1001764-02
portCfgPersistentDisable
2
Operands This command has the following operands:
slot On bladed systems only, specifies the slot number of the ports to be disabled
persistently, followed by a slash (/).
port1[-port2] Persistently disables a single port or a range of ports identified by port
numbers. The port range cannot span slots, but you can specify multiple port
ranges pairs separated by a space, for example 3/1-4 4/7-9.
-i index1[-index2] Persistently disables a port or a range of ports identified by port index
numbers. You may specify multiple index ranges separated by a space, for
example, -i 33-38 40-60.
-f Ignores nonexisting ports. This operand is valid only with the -i option.
-slot [slot1[-slot2] Persistently disables all ports on a slot or on a range of slots, for example, -s
3-5. You may specify multiple slot ranges separated by a space, for example,
-s 3-5 8-10.
-h Displays the command usage.
Examples To disable a single port persistently:
switch:admin>
portcfgpersistentdisable 2/4
To disable a range of ports persistently:
switch:admin> portcfgpersistentdisable 2/4-8
To disable multiple port ranges persistently:
switch:admin>
portcfgpersistentdisable 2/12 -15 3/10-12 4/3-4
To display the portSwap status:
switch:admin>
portcfgpersistentdisable -i
portcfgpersistentdisable: portSwap feature enabled.
'-i' option not supported.
To disable a port persistently by specifying its index number:
switch:admin> portcfgpersistentdisable -i 176
To disable a range of ports persistently by specifying the corresponding port index range:
switch:admin>
portcfgpersistentdisable -i 17-18
To disable multiple ports persistently by specifying multiple port index ranges:
switch:admin>
portcfgpersistentdisable -i 17-18 30-39
To disable all ports on slots 3-5 persistently:
switch:admin>
portcfgpersistentdisable -s 3-5
To disable all ports on slots 3-5 and 8-10 persistently:
switch:admin>
portcfgpersistentdisable -s 3-5 8-10