Dell POWEREDGE M1000E - Manual (Page 399)

Fabric OS Command Reference 367
53-1001764-02
fwConfigure
2
Notes This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Not all platforms support fans or power supplies. If you attempt to configure values for these items
the following displays: "ERROR: No threshold available.
Operands This command has the following optional operands:
--
enable --port port
Enables all thresholds associated with a certain port.
--
disable --port port
Disables all thresholds associated with a certain port.
Examples To configure thresholds in Fabric OS mode:
switch:admin>
fwconfigure
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa performance Monitor class
8 : EE performance Monitor class
9 : Filter performance Monitor class
10 : Security class
11 : Resource class
12 : Quit
Select a class => : (1..12) [1]
1
1 : Temperature
2 : Fan
Fabric E_Port downs
Fabric reconfigure
Domain ID changes
Segmentation changes
Zone changes
Fabric<->QL
Fabric logins
SFP state changes
FFL_Port (Optical Same as Port class
FFL_Port (Copper) Same as Port class
Resource class Flash area
EE Performance Monitor Invalid CRCS
RX Performance
TX Performance
Filter Performance Monitor Customer Defined
Resource Flash
TABLE 19 Access Gateway mode
Class Area