Dell POWEREDGE M1000E - Manual (Page 282)

250 Fabric OS Command Reference
53-1001764-02
fcipHelp
2
fcipHelp
Displays FCIP command information.
Synopsis fciphelp
Description Use this command to display a listing of Fibre Channel over IP (FCIP) commands with short
descriptions for each command. FCIP commands require an FCIP license.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display FCIP command help information:
switch:admin>
fciphelp
fastwritecfg Configure FC fastwrite feature
portcfg Create/Delete a new ip interface/route/arp entry or
fcip tunnel on the GigE port
portcmd Execute commands (ping etc) on the GigE port
portshow Show configured ip interfaces/routes/arp entries or
fcip tunnels on the GigE Port
See Also fastWriteCfg, portCfg, portCmd, portShow