Dell POWEREDGE M1000E - Manual (Page 892)

860 Fabric OS Command Reference
53-1001764-02
secStatsReset
2
secStatsReset
Resets one or all security statistics to 0.
Synopsis secstatsreset [name][,” domain[;domain]”]
Description Use this command to reset one or all security statistics to 0. This command can be issued on any
switch to reset the security statistics on the local switch or chassis. If an FCS policy is enabled and
secStatsReset is issued on the primary FCS switch, this command can reset security statistics for
any or all switches in the fabric.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands When invoked without operands, this command displays the security statistics on the local switch
or chassis. The following operands are optional:
name Specify the name of a security statistic you would like to reset. The specified
policy name must be capitalized. If executed on the primary FCS, specify an
asterisk (*) to reset all security policies. Valid values for this operand are:
TELNET_POLICY
HTTP_POLICY
API_POLICY
RSNMP_POLICY
WSNMP_POLICY
SES_POLICY
MS_POLICY
SERIAL_POLICY
FRONTPANEL_POLICY
SCC_POLICY
DCC_POLICY
LOGIN
INVALID_TS
INVALID_SIGN
INVALID_CERT
AUTH FAIL
SLAP_BAD_PKT
TS_OUT_SYNC
NO_FCS
INCOMP_DB
ILLEGAL_CMD