Dell POWEREDGE M1000E - Manual (Page 436)

404 Fabric OS Command Reference
53-1001764-02
ifModeSet
2
serial console port.
Are you sure you really want to do this? (yes, y, no, n): [no]
y
Proceed with caution.
Auto-negotiate (yes, y, no, n): [no]
y
Advertise 100 Mbps / Full Duplex (yes, y, no, n): [yes]
y
Advertise 100 Mbps / Half Duplex (yes, y, no, n): [yes]
y
Advertise 10 Mbps / Full Duplex (yes, y, no, n): [yes]
y
Advertise 10 Mbps / Half Duplex (yes, y, no, n): [yes] y
Committing configuration...done.
To force the link for the eth0 interface from autonegotiation to 10 Mbps half-duplex operation,
when entering this command through the serial console port:
switch:admin>
ifmodeset eth0
Auto-negotiate (yes, y, no, n): [yes]
n
Force 100 Mbps / Full Duplex (yes, y, no, n): [no]
n
Force 100 Mbps / Half Duplex (yes, y, no, n): [no] n
Force 10 Mbps / Full Duplex (yes, y, no, n): [no]
n
Force 10 Mbps / Half Duplex (yes, y, no, n): [no]
y
Committing configuration...done.
See Also ifModeShow