Dell POWEREDGE M1000E - Manual (Page 451)

Fabric OS Command Reference 419
53-1001764-02
iodShow
2
iodShow
Displays the in-order delivery (IOD) setting.
Synopsis iodshow
Description Use this command to display the IOD setting on the switch. By default, IOD is disabled.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display the current setting of the IOD setting:
switch:admin>
iodshow
IOD is not set
See Also iodReset, iodSet