Dell POWEREDGE M1000E - Manual (Page 951)

Fabric OS Command Reference 919
53-1001764-02
supportShowCfgShow
2
supportShowCfgShow
Displays the groups of commands enabled for display by the supportShow command.
Synopsis supportshowcfgshow
Description Use this command to display the groups of commands enabled for display by the supportShow
command. Use the supportShowCfgEnable and the supportShowCfgDisable commands to modify
which groups are displayed.
The FCIP commands are supported only on the Brocade 7800/FX8-24 and 7500/7500E/FR4-18i
platforms and cannot be configured to collect or display data on unsupported platforms.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display command groups configured for data collection on the Brocade 5100:
switch:admin>
supportshowcfgshow
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled
iswitch disabled
asic_db enabled
iscsi disabled
ag disabled
To display command groups configured for data collection on the Brocade 7800
switch:admin> supportshowcfgshow
os enabled
exception enabled
port enabled
fabric enabled
services enabled
security enabled
network enabled
portlog enabled
system enabled
extend disabled
filter disabled
perfmon disabled
ficon disabled
iswitch enabled