Dell POWEREDGE M1000E - Manual (Page 47)

Fabric OS Command Reference 15
53-1001764-02
ad
2
-m mode Specifies the mode in which Admin Domain configuration information is
displayed. This operand is valid only with --show and --validate. Valid
values for mode include:
0 Displays the Admin Domain configuration in the current transaction buffer.
1 Displays the Admin Domain configuration stored in persistent memory
(defined configuration).
2 Displays the currently enforced Admin Domain configuration currently
enforced (effective configuration).
Examples To enable AD5:
switch:admin>
ad --activate 5
You are about to activate a new admin domain.
Do you want to activate ‘5’ admin domain (yes, y, no, n): [no]
y
To enable AD_13:
switch:admin>
ad --activate AD_13
To add new device members to AD1:
switch:admin>
ad --add AD1, -d “100,5; 4,1”
To apply all changes made to the Admin Domain configurations since
--
apply was last executed:
switch:admin> ad --apply
You are about to enforce the saved AD configuration.
This action will trigger ad --apply to all switches in the fabric.
Do you want to apply all admin domains (yes, y, no, n): [no] y
To clear all Admin Domain definitions:
switch:admin>
ad --clear
You are about to delete all ADs definitions.
This operation will fail if zone configurations exists in AD1-AD254
Do you want to clear all admin domains (yes, y, no, n): [no] y
To create an Admin Domain with a mix of D,PI, WWNs, and zone alias device members (two
different methods shown):
switch admin>
ad --create “AD1”, -d “100,5; 1,3; 20:00:00:e0:8b:05:4d:05”
switch admin>
ad --create 1, -d “100,5; 1,3; 21:00:00:e0:8b:05:4d:05”
To create an Admin Domain with two switches identified by domain ID and switch WWN:
switch:admin>
ad --create “AD1”, -s “100; 10:00:00:60:69:80:59:13”
To create an Admin Domain with a device list and a switch list:
switch:admin>
ad --create “AD1”, -d “100,5; 1,3; 21:20:00:00:e0:8b:05:4d:05” -s “100;
10:00:00:60:69:80:59:13”
To deactivate Admin Domain 5:
switch:admin>
ad --deactivate 5
You are about to deactivate an AD.
This operation will fail if an effective zone configuration exists in the AD
Do you want to deactivate ‘5’ admin domain (yes, y, no, n): [no]
y