Dell POWEREDGE M1000E - Manual (Page 755)

Fabric OS Command Reference 723
53-1001764-02
portLogShow
2
fcin Indicates an incoming Fibre Channel information unit.
fcout Indicates an outgoing Fibre Channel information unit.
read Indicates an information unit header log from a read operation.
write Indicates an information unit header log from a write operation.
err Indicates an information unit header log of an FC error frame.
frame Indicates a Fibre Channel frame payload.
nsRemQ Indicates an interswitch name server query.
rscn Indicates a Registered State Change Notification.
xalloc Allocates an exchange.
xfree Frees an exchange.
xerr Indicates an exchange error.
xstate Indicates an exchange state.
payload Indicates a frame payload.
Port Displays the port number that logged the event.
Cmd Defined by the event. Displays a value defined by the event as follows:
ioctl I/O control command code.
Tx & Rx Frame payload size.
scn New state (see state codes below).
pstate New physical state (see pstate codes below).
ctin The CT-subtype:
fc Simple Name Server.
f8 Alias Server.
ctout The same as ctin.
errlog Error level (refer to errShow).
loopscn The current loop state during loop initialization. Possible values are:
OLP Offline (disconnected or nonparticipating).
LIP FL_Port entered INITIALIZING or OPEN_INIT state.
LIM LISM completed, FL_Port became the loop master.
BMP Loop init completed, FL_Port in MONITORING state.
OLD Port transitioned to the OLD_PORT state.
TMO Loop init times out.
Args Displays additional information about the event as follows:
start Start type: 0 = enable ports, 100 = disable ports.
disable State (refer to state codes).
enable Mode: 0 normal; nonzero loopback.