Dell POWEREDGE M1000E User Manual
Page 987
Fabric OS Command Reference
955
53-1001764-02
sysMonitor
2
Custom:
TimeBase: None
Value : 100
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog
Default:
TimeBase: None
Value : 90
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog
Low:
Custom:
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Default:
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Buffer:
Custom:
Value : 0
Default:
Value : 0
To configure the thresholds for memory usage monitoring:
switch:admin>
sysmonitor --config mem -poll 10 -retry 3 -limit 60 -action snmp,raslog \\
-high_limit 70 -low_limit -40
To display the current memory usage and configuration:
switch:admin>
sysmonitor --show mem
Showing Memory Usage:
Used Memory : 192020k 25%
Total Memory : 768080k
Free Memory : 576060k
Used Memory Limit : 60%
Low Used Memory Limit : 40%
High Used Memory Limit: 70%
Polling Interval : 60 seconds
No Of Retries : 3
Actions : none
To configure the threshold for monitoring system CPU usage:
switch:admin>
sysmonitor --config cpu -poll 20 -retry 4 -limit 70 -action snmp
To display the current memory usage threshold:
switch:admin>
sysmonitor --show cpu
Showing Cpu Usage:
Cpu Usage : 21.9%
Cpu Usage limit : 75%
Number of Retries : 4
Polling Interval : 120 seconds
Actions : none
See Also
fwHelp, portFencing, portThConfig, thConfig