Dell POWEREDGE M1000E - Manual (Page 974)

942 Fabric OS Command Reference
53-1001764-02
switchStatusShow
2
switchStatusShow
Displays overall switch status.
Synopsis switchstatusshow
Description Use this command to display the overall status for a switch that is configured with IPv4 and IPv6
addresses. In addition, users with a Fabric Watch license are able to view the list of unhealthy
ports.
This command displays the overall switch status, and the status of the following contributors:
• Power supplies
• Temperatures
• Fans
• WWN servers (dual-CP systems only)
• Standby CP (dual-CP systems only with HA enabled)
• Blades (bladed systems only)
• Flash
• Marginal ports
• Faulty ports
• Missing SFPs
Status values are HEALTHY, MARGINAL, or DOWN, depending on whether thresholds established by
switchStatusPolicySet have been exceeded. The overall status is based on the most severe status
of all contributors.
Refer to switchStatusPolicyShow for details on the calculation of contributors and overall switch
status.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display a switch health report:
To retrieve a switch health report for a switch that is configured
with an IPv6 address:
switch:user> switchstatusshow
Switch Health Report Report time: 09/11/2006 05:39:28 PM
Switch Name: switch
IP address: 1080::8:800:200C:417A
SwitchState: MARGINAL
Duration: 80:12
Power supplies monitor HEALTHY
Temperatures monitor HEALTHY
Fans monitor HEALTHY
Flash monitor MARGINAL
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY