Dell POWEREDGE M1000E - Manual (Page 855)

Fabric OS Command Reference 823
53-1001764-02
routeHelp
2
routeHelp
Displays a list of FSPF-related commands.
Synopsis routehelp
Description Use this command to display a list of fabric-shortest-path-first (FSPF)-related commands.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display a list of routing-related commands:
switch:admin>
routehelp
aptpolicy Get and set Advanced Performance Tuning policy
bcastshow Display broadcast routing information
dlsreset Turn off the dynamic load sharing (DLS) option
dlsset Turn on the dynamic load sharing (DLS) option
dlsshow Display the state of the dynamic load sharing
option
fspfshow Print FSPF global information
interfaceshow Display the FSPF (TM) interface information
iodreset Turn off the in-order delivery (IOD) option
ioddelayreset Configure in-order-delivery (IOD) delay parameter
ioddelayshow Display in-order-delivery (IOD) delay parameter
iodset Turn on the in-order delivery (IOD) option
iodshow Display the state of the in-order delivery option
linkcost Set or print the FSPF cost of a link
lsdbshow Displays the FSPF link state database
nbrstateshow Display FSPF (TM) neighbors' states
nbrstatsclear Reset the FSPF (TM) interface counters
topologyshow Display the unicast fabric topology
urouteconfig Configure a static route
urouteremove Remove a static route
urouteshow Display unicast routing information
See Also bcastShow, interfaceShow, uRouteShow