Dell POWEREDGE M1000E - Manual (Page 780)

748 Fabric OS Command Reference
53-1001764-02
portShow
2
Operands This command has the following port operands:
slot For bladed systems only, specifies the slot number of the port to be displayed,
followed by a slash (/).
port Specifies the number of the port to be displayed, relative to its slot for bladed
systems. Use switchShow for a listing of valid port numbers.
-i index1[-index2] Specifies a port or a range of ports identified by port index numbers. You can
specify multiple index ranges separated by a space, for example, 33-38
40-60. Port indexes are supported only if PortSwap is disabled. They are not
supported on GbE ports and configured F_Port trunks. Use the -i option
without a port index argument to display the portSwap status, or alternately
use portSwapShow.
Examples To display the current state of a port:
switch:admin> portshow 43
portIndex: 43
portName:
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x1000490b PRESENT ACTIVE E_PORT T_PORT T_MASTER G_PORT U_PORT
LOGICAL_ONLINE LOGIN LED
portType: 18.0
POD Port: Port is licensed
portState: 1 Online
Protocol: FC
portPhys: 6 In_Sync portScn: 16 E_Port Trunk master port
port generation number: 0
state transition count: 1
portId: 230100
portIfId: 43020009
portWwn: 20:2b:00:05:1e:07:c7:26
portWwn of device(s) connected:
Distance: normal
portSpeed: N4Gbps
LE domain: 0
FC Fastwrite: OFF
Interrupts: 0 Link_failure: 0 Frjt: 0
Unknown: 0 Loss_of_sync: 1 Fbsy: 0
Lli: 11 Loss_of_sig: 2
Proc_rqrd: 9877 Protocol_err: 0
Timed_out: 0 Invalid_word: 14
Rx_flushed: 0 Invalid_crc: 0
Tx_unavail: 0 Delim_err: 0
Free_buffer: 0 Address_err: 0
Overrun: 0 Lr_in: 2
Suspended: 0 Lr_out: 0
Parity_err: 0 Ols_in: 0
2_parity_err: 0 Ols_out: 1
CMI_bus_err: 0
switch:admin>