Dell POWEREDGE M1000E - Manual (Page 1046)

1014 Fabric OS Command Reference
53-1001764-02
zone
2
To validate all zones in the zone database in the effective configuration:
switch:admin>
zone --validate -m 2
Effective configuration:
cfg: ticonfig
zone: regzone 1,4*
1,5*
------------------------------------
~ - Invalid configuration
* - Member does not exist
# - Invalid usage of broadcast zone
To prune all the zone members that are not enforceable:
switch:admin>
zone --validate -f
You are about to prune the zone configurations,
based on zone --validate output.
Do you want to prune the zone
configurations (yes, y, no, n): [no] y
2. Traffic isolation zone commands:
To create an activated traffic isolation zone with failover enabled (default).
switch:admin>
zone --create -t ti purplezone -p "1,1; 2,4; 1,8; 2,6"
To create a deactivated traffic isolation zone with failover disabled:.
switch:admin>
zone --create -t ti -o dn purplezone -p "1,1; 2,4; 1,8; 2,6"
To add an E_Port and N_Port member as a portlist to an existing TI zone:
switch:admin> zone --add purplezone -p "3,4; 3,6"
To add the option to disable failover for a TI zone:
switch:admin>
zone --add -o n purplezone
To add the option to enable failover for a TI zone:
switch:admin>
zone --add -o f greenzone" -p "3,4"
To remove portlist members from an existing TI zone.
switch:admin>
zone --remove bluezone -p "3,4; 3,6"
To activate the TI zone "bluezone":
switch:admin>
zone --activate bluezone
To deactivate the TI zone "purplezone":
switch:admin> zone --deactivate purplezone
To delete the TI zone "bluezone":
switch:admin>
zone --delete bluezone