Dell POWEREDGE M1000E - Manual (Page 870)

838 Fabric OS Command Reference
53-1001764-02
secGlobalShow
2
secGlobalShow
Displays the current internal security state information.
Synopsis secglobalshow
Description Use this command to display security server-specific information as a snapshot of its current state.
The output may include information about the following:
• General security parameters
• The latest zone transaction
• The current status of the RCS transaction
• The state of the Domain
• wwnDL state
This command is intended primarily for debugging purposes by technical support staff. The
information displayed may not be supported between releases and is subject to change without
notice.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To view the current security state:
switch:admin>
secglobalshow
----General Security Information----
flag 1, saveflag 0
transId 0
Queue Size 0
final Rca 0
reliablemsg 0
reliablePhase 0
Primary pub key: Empty
Primary Version 0
Primary WWN 10:00:00:05:1e:01:23:e0 (local switch)
Stamp 0
----The latest zone transaction--
last retVal from zone: not used
last zone size when calling zone: not used
----The latest RCS STATUS----
RCS was enabled
sec_aca: free
RCS latest Phase: Completion
RCS Message ==> RCS transaction completes.
----DataBase STATUS----
Retry Role 0
Retry Qeury0
Security Active DataSize 35 bytes
-----Domain State-----
Active Sum 215b