Diagenablepost – Dell POWEREDGE M1000E User Manual

Page 237

Text mode
Original mode

Fabric OS Command Reference

205

53-1001764-02

diagEnablePost

Enables the power-on self-test (POST).

Synopsis

diagenablepost

Description

Use this command to enable POST. A reboot is not required for this command to take effect. POST
includes two phases: POST Phase I mainly tests hardware and POST Phase II tests system
functionality.

Use the diagPost command to display the current POST status, and use diagDisablePost to disable
POST.

Note

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

none

Examples

To enable POST:

switch:admin>

diagenablepost

Config update Succeeded

Diagnostic POST is now enabled.