Dell POWEREDGE M1000E User Manual

Page 622

590

Fabric OS Command Reference

53-1001764-02

perfSetPortEEMask

TxSIDMsk

Specify the transmitting source ID mask in dd:aa:pp format, with quotation
marks, where dd is the domain ID mask, aa is the Area ID mask, and pp is
AL_PA ID mask. For example, "00:ff:00" uses only the Area ID to trigger the EE
monitor.

Specify the following values to turn a specific field on or off:

Specifies that the field does not trigger EE monitors.

Specifies that the field does triggers EE monitors.

TxDIDMsk

Specify the transmitting Destination ID mask, in quotation marks, in dd:aa:pp
format.

RxSIDMsk

Specify the receiving Source ID mask, in quotation marks, in dd:aa:pp format.

RxDIDMsk

Specify the destination ID mask, in quotation marks, in dd:aa:pp format

Examples

To set the overall mask for end-to-end monitors on a port:

switch:admin>

perfsetporteemask 1/6 "00:00:00" "ff:ff:ff" "00:ff:ff" "ff:00:00"

Changing EE mask for this port will cause ALL EE monitors on this port to be

deleted.

continue? (yes, y, no, n): [no]

The EE mask on port 6 is set and EE Monitors on this port are deleted