Urouteremove – Dell POWEREDGE M1000E User Manual

Page 1021

Fabric OS Command Reference

989

53-1001764-02

uRouteRemove

Removes a static route.

Synopsis

urouteremove in_area domain

Description

Use this command to remove a previously configured static route.

After this command is issued, the route to domain for in_area might change to use a different
output port, but only if dynamic load sharing (DLS) is set. If DLS is not set, the route remains as is,
with its route attribute changed from static to dynamic.

Note

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

This command has the following operands:

in_area

Specify the input port of the static route to remove. in_area can be either an
F_Port or an E_Port.

domain

Specify the destination domain of the static route to remove.

Examples

To remove a static route for all traffic coming in from port 1 and addressed to domain 2:

switch:admin>

urouteremove 1 2

done.