Syslogdipadd – Dell POWEREDGE M1000E User Manual

Page 979

Fabric OS Command Reference

947

53-1001764-02

syslogdIpAdd

Configures a switch to forward system messages to specified servers.

Synopsis

syslogdipadd ip_address

Description

Use this command to configure a switch to forward all error log entries to the syslog daemon
(syslogd) of one or more specified servers. The syslog daemon is a process available on most UNIX
systems that reads and forwards system messages to the appropriate log files or users, depending
on the system configuration. Up to six servers are supported.

Only one syslogd server can be specified at any given time. To configure more than one server, the
command must be executed for each server.

Note

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

This command has the following operands:

ip_address

Specifies the IP address of the server running syslogd in IPv4 or IPv6 format.

Examples

To add an IP address to the list of machines to which system messages are sent:

switch:admin>

syslogdipadd

1080::8:800:200C:417A

switch:admin>

syslogdipshow

syslog.1 1080::8:800:200C:417A

To add a second IP address to the existing syslogd server configuration:

switch:admin>

syslogdipadd 192.168.163.234

switch:admin>

syslogdipshow

syslog.1 1080::8:800:200C:417A

syslog.2 192.168.163.234