Dell POWEREDGE M1000E - Manual (Page 149)

Fabric OS Command Reference 117
53-1001764-02
configDownload
2
configDownload
Downloads configuration data to the system.
Synopsis configdownload
configdownload [- all ] [-p ftp | -ftp ] [”host”,”user”,”path” [,”passwd”]]
configdownload [- all ] [-p scp| -scp ] [”host”,”user”,”path”]
configdownload [- all ] [-local | -USB | -U [”file”]]
configdownload [ -fid -FID [-sfid FID ] | -chassis |-all ] [-p ftp | -ftp ] [”host”,”user”,”path”
[,”passwd”]]
configdownload [ -fid -FID [-sfid FID ] | -chassis |- all ] [-p scp| -scp ] [”host”,”user”,”path”]
configdownload [ -fid -FID [-sfid FID ] | -chassis |- all ] [-local | -USB | -U [”file”]]
configdownload [ -vf] [-p ftp | -ftp ] [”host”,”user”,”path” [,”passwd”]]
configdownload [ -vf] [-p scp| -scp ] [”host”,”user”,”path”]
configdownload [ -vf] [-local | -USB | -U [”file”]]
Description This command downloads configuration parameters to the local system. Two types of configuration
files can be downloaded with this command: Virtual Fabric configuration parameters and system
configuration parameters. You must download both types of configuration data for the system to
behave as expected. You can use FTP or SCP to download configuration files from a remote host, or
you can retrieve the configuration files from a predetermined directory on the local system, or from
an attached USB device.
Use the -vf option to download the Virtual Fabric configuration parameters. The Virtual Fabric
configuration file includes logical switch definitions for a specific platform, the platform ID, Virtual
Fabric status (enabled or disabled), and F_Port trunking ports. The file should be named
switch-conf_xx.txt to distinguish it from the regular system configuration (config.txt). The xx
indicates the platform ID. Virtual Fabric configuration data can only be shared between switches
that belong to the same platform type and share the same platform ID. If the platform ID contained
in the header of the configuration file does not match the platform ID of the system to which it is
downloaded, configDownload fails. When you download a switch-conf_xx.txt file, all attributes
defined in this file are downloaded to the system and take effect with the exception of LISL ports.
The LISL ports on the system are not affected by this download.
The system configuration data is downloaded separately. It is grouped into chassis information and
switch information. Each configuration type is managed separately and the behavior of
configDownload depends on the environment in which the command is executed and which part of
the system configuration you wish to download.
• In a Virtual Fabric environment, when executed without chassis permissions, this command
downloads the switch configuration to the current logical switch only. An Admin user with
chassis permissions can use additional parameters to perform the following selective
configuration downloads:
- Download the switch configuration to a specified logical switch (-fid FID).
- Download the switch configuration from a specified logical switch source (-sfid FID) to a
specified logical switch target (-fid FID).
- Download the chassis configuration only (-chassis).