Dell POWEREDGE M1000E - Manual (Page 550)

518 Fabric OS Command Reference
53-1001764-02
myId
2
myId
Displays the current login session details.
Synopsis myid
Description Use this command to display the status of the system and the login session details. This includes
IPv4 or IPv6 addresses associated with the login session.
The login session gives details of the following:
• CP/switch (or console/serial port) used to log in.
• The IP address of the current login session for Telnet or the name of the current console port or
the serial port (if modem login used).
• The current CP mode (Active, Standby, or Unknown).
• The current system status (Redundant, Nonredundant, or Unknown).
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display current login information:
switch:admin>
myid
Current Switch: switch
Session Detail: switch (123.123.123.123) Active Redundant
See Also version