Dell POWEREDGE M1000E - Manual (Page 1023)

Fabric OS Command Reference 991
53-1001764-02
uRouteShow
2
port Specify the number of the input port whose routes are to be displayed,
relative to its slot for bladed systems. Use switchShow to display a list of valid
ports. This operand is optional; if omitted, the command displays routing
information for all input ports in the switch.
domain Specify a remote domain in the fabric for which routing information is to be
displayed. This operand is optional; if omitted, the routing information for all
domains in the fabric is displayed.
Examples To display the routing information of all the active ports:
switch:admin>
urouteshow
Local Domain ID: 3
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
---------------------------------------------------------------------------
0 1 11 1000 1 D 1,0
11 2 0 1500 2 D 4,0
4 0 500 1 D 4,0
16 1 27 1000 1 D 1,1
27 2 16 1500 2 D 4,16
To display the routing information of port 11 to domain 4 only:
switch:admin>
urouteshow 1/11, 4
Local Domain ID: 3
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
----------------------------------------------------------------------------
11 4 16 500 1 D 4,16
See Also portRouteShow, topologyShow, uRouteConfig, uRouteRemove