Dell POWEREDGE M1000E - Manual (Page 331)

Fabric OS Command Reference 299
53-1001764-02
fcrProxyConfig
2
“WWN does not exist in any proxy device slot” is displayed if the WWN does
not exist in any slot for the specified edge fabric.
“Too many proxy slots configured. Remove some unused proxy device WWNs
from their slots using the -r operand and try again.” is displayed if all slots are
used for the specified edge fabric.
“The specified slot already contains a WWN, overwrite? [y]” is displayed if the
specified slot already contains an entry. You are then prompted for overwrite
confirmation.
-r importedFID devWWN
Removes the specified devWWN (format: XX:XX:XX:XX:XX:XX:XX:XX) from its
slot for the edge fabric specified by importedFID (1 through 128).
“WWN does not exist in any proxy device slot.” is displayed if the WWN does
not exist in any slot for the specified edge fabric.
Examples To display the persistent proxy device configuration:
switch:admin>
fcrproxyconfig
Imported FID Device WWN Slot
002 50:05:07:65:05:84:08:d7 f001
002 50:05:07:65:05:84:0a:7b f002
002 22:00:00:20:37:c3:11:71 f001
002 22:00:00:20:37:c3:1a:8a f002
003 10:00:00:00:c9:2b:6a:2c f001
To persistently configure device WWN 00:11:22:33:44:55:66:77 to use slot f101h in fabric 5:
switch:admin>
fcrproxyconfig -s 5 00:11:22:33:44:55:66:77 f101
To remove device WWN 00:11:22:33:44:55:66:77 from its persistent slot in fabric 5:
switch:admin>
fcrproxyconfig -r 5 00:11:22:33:44:55:66:77
WWN deleted from proxy device slot
See Also fcrPhyDevShow, fcrProxyDevShow, fcrXlateConfig, lsanZoneShow, switchShow