Tracedump – Dell POWEREDGE M1000E User Manual
Page 1004
972
Fabric OS Command Reference
53-1001764-02
traceDump
2
traceDump
Initiates, or removes a trace dump or displays the trace dump status.
Synopsis
tracedump [-S ]
tracedump -n [-s slot]
tracedump -r [-s slot] | -R
tracedump -c [-s slot]
Description
Use this command to initiate a background trace dump, to remove the content of a trace dump, or
to display the dump status on the switch.
When executed without operands, this command defaults to traceDump -S.
Execution of traceDump –n generates a local trace dump locally. Use supportSave to transfer the
local trace dump to a remote host. When supportSave is used, the default remote file name format
for the trace dump file is as follows:
chassisname-S#-YYYYMMDDHHMMSS.
S#
Indicates the slot number (0 on standalone platforms)
YYYYMMDDHHMMSS
Indicates the trace dump time stamp (year-month-day-hour-minute-second).
new | old
Indicates a new or an old trace dump file.
dmp.gz
The compressed trace dump archive file extension.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following mutually exclusive operands:
-S
Displays the trace dump status This operand is optional. If omitted, the same
status information is displayed.
-n
Initiates a background trace dump.
-r
Clears the status of a particular trace dump on a specified slot.
-R
Clears the status of a particular trace dump on all slots.
-c
Clears all trace dump buffers. This operation resets the trace buffer contents.
This command has the following optional operand:
-s slot
Specifies the slot number from which a trace dump is generated. If a slot is
not supplied, the trace dump is generated from the local slot. This operand is
optional.
Examples
To initiate a background trace dump from slot 5:
switch:admin>
tracedump -n -s 5