Fwalarmsfilterset – Dell POWEREDGE M1000E User Manual

Page 392

360

Fabric OS Command Reference

53-1001764-02

fwAlarmsFilterSet

Enables or disables alarms for Fabric Watch.

Synopsis

fwalarmsfilterset [mode]

Description

Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all
nonenvironment class alarms are suppressed. By turning on the alarms, all class alarms are
generated.

Notes

This command requires a Fabric Watch license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

This command has the following operand:

mode

Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is
specified, the default value is 0 (alarms deactivated). This operand is
optional.

Examples

To enable alarms in Fabric Watch:

switch:admin>

fwalarmsfilterset

FW: Alarms are already disabled

switch:admin>

fwalarmsfilterset 1

FW: Alarms are already enabled