Dell POWEREDGE M1000E - Manual (Page 193)

Fabric OS Command Reference 161
53-1001764-02
cryptoCfg
2
HA_cluster_name
Specifies the name for the HA cluster. The name can be up to 31 characters
long and can include alphanumeric characters, hyphens, and underscores.
White space and other special characters are not permitted. This operand is
required.
node_WWN Specifies the WWN of the switch or chassis to which the encryption engine
belongs. This operand is optional; if omitted, only the HA cluster name is
defined. You may add EEs separately with the --add -haclustermember
command.
slot Specifies the encryption engine slot number on bladed systems.
--
delete -hacluster
Deletes the HA cluster with the specified name. This command is valid only
on the group leader. The following operand is required:
HA_cluster_name
Specifies the name of the HA cluster to be deleted.
--
add -haclustermember
Adds one or more encryption engine members to an already configured HA. A
maximum of two HA cluster members is currently supported. The EEs must
be part of the same encryption group as the node on which this command is
issued. This command is valid only on the group leader. The encryption
engines must belong to different switches or chassis. This rule is enforced by
the CLI to ensure redundancy.
The following operands are required with the --add command:
node_WWN Specifies the node WWN of the switch or chassis to which the encryption
engine belongs.
slot Specifies the encryption engine slot number on bladed systems.
--
remove -haclustermember
Removes one or both encryption engine members from an already configured
HA cluster. This command is valid only on the group leader. This command
only removes the failover/failback capability for the removed EEs; it does not
affect the relationship between configured CryptoTarget containers and the
encryption engine that is removed from the HA cluster. The containers still
belong to this encryption engine and encryption operations continue.
The following operands are required with the --remove command:
node_WWN Specifies the WWN of the switch or chassis to which the encryption engine
belongs.
slot Specifies the encryption engine slot number on bladed systems.
--
replace -haclustermember
Replaces an encryption engine, either failed or alive, with an alternate
encryption engine. All target associations for the current encryption engine
are transferred over to the alternate encryption engine when this command is
executed. The alternate encryption engine does not have to be part of the
current HA cluster. Upon successful replacement, the alternate encryption
engine automatically becomes part of the configured HA cluster and
disrupted peer relationships are repaired. This command is only valid on the
group leader.