Dell POWEREDGE M1000E - Manual (Page 696)

664 Fabric OS Command Reference
53-1001764-02
portCfgNPIVPort
2
Use the portCfgShow command to determine whether NPIV is enabled on a port and to display the
maximum logins configured for that port. Use the portCfgDefault command to reset all port
configurations, including the NPIV configuration of a port.
Operands This command has the following operands:
slot For bladed systems only, specifies the slot number of the port to be
configured, followed by a slash (/).
port Specifies the number of the port to be configured, relative to its slot for
bladed systems. Use switchShow for a listing of valid ports.
--
enable Enables NPIV on the specified port. This command can be executed only in
switch mode.
--
disable Disables NPIV on the specified port. This command can be executed only in
switch mode.
--
setloginlimit login_limit
Sets the maximum number of allowed logins for the specified port. This
command can be executed both in switch mode and Access Gateway mode.
Valid values for login_limitrange from 0 to 255. The default value is 126.
--
help Displays the command usage.
mode Enables or disables NPIV on the specified port. Specify 1 to enable or 0 to
disable the feature. The mode operand is a legacy command; it will be
deprecated in a future Fabric OS release.
Examples To display the current NPIV port configuration:
switch:admin>
portcfgshow
Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-------------------+--+--+--+--+----+--+--+--+----+--+--+--+----+--+
Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN
Fill Word 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
AL_PA Offset 13 .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
Long Distance .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
VC Link Init .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked L_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked G_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Disabled E_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked E_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
ISL R_RDY Mode .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Persistent Disable.. .. ON ON .. .. .. .. .. .. .. .. .. .. .. ..
LOS TOV enable .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
NPIV capability ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
NPIV PP Limit 80 80 80 80 80 80 80 80 95 95 95 95 95 95 95 95
QOS E_Port .. .. AE AE AE AE AE AE AE AE AE AE AE AE AE AE
EX Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Mirror Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Rate Limit .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Credit Recovery ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
Fport Buffers .. .. .. ON .. .. .. .. .. .. ON .. .. .. .. ..
Port Auto Disable .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
CSCTL mode .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
(output truncated)