Dell POWEREDGE M1000E - Manual (Page 610)

578 Fabric OS Command Reference
53-1001764-02
perfHelp
2
perfHelp
Displays performance monitoring help information.
Synopsis perfhelp
Description Use this command to display the help commands available for performance monitoring.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To display commands related to performance monitoring:
switch:admin>
perfhelp
fmConfig Manage frame monitor configuration
perfAddEEMonitor Add end-to-end monitor
perfAddIPMonitor Add monitor for IP traffic frame count
(Will be deprecated in Fabric OS v6.5.0;
use fmConfig)
perfAddReadMonitor Add filter-based monitor - SCSI Read
(Will be deprecated in Fabric OS v6.5.0;
use fmConfig)
perfAddRWMonitor Add monitor - SCSI Read and Write
(Will be deprecated in Fabric OS v6.5.0;
use fmConfig)
perfAddSCSIMonitor Add monitor for SCSI frame count
(Will be deprecated in Fabric OS v6.5.0;
use fmConfig)
perfAddUserMonitor Add filter-based monitor
(Will be deprecated in Fabric OS v6.5.0;
use fmConfig)
perfAddWriteMonitor Add filter-based monitor - SCSI Write
(Will be deprecated in Fabric OS v6.5.0;
use fmConfig)
perfCfgClear Clear Performance settings from FLASH
perfCfgRestore Restore Performance configuration from
FLASH
perfCfgSave Save Performance configuration to FLASH
perfDelEEMonitor Delete an end-to-end monitor
perfDelFilterMonitor Delete filter-based monitor
(Will be deprecated in Fabric OS v6.5.0;
use fmConfig)
perfMonitorClear Clear end-to-end/filter-based/ISL monitors
(Management of the filter-based class will be
deprecated in Fabric OS v6.5.0; use fmConfig)
perfMonitorShow Show end-to-end/filter-based/ISL monitors
(Management of filter-based class will be
deprecated in Fabric OS v6.5.0; use fmConfig)
perfSetPortEEMask Set overall mask for end-to-end monitors
perfShowAlpaCrc Get ALPA CRC count by port and ALPA