Dell POWEREDGE M1000E - Manual (Page 784)

752 Fabric OS Command Reference
53-1001764-02
portShow
2
Perm Net Network-wide permanent entry. The same as the permanent entry except
that no destination address was defined (defaults to 0.0.0.0), so traffic
to all destinations is tagged.
App Application layer VLAN configuration defined at the circuit level.
Examples To display the IP interface and static route configured on Brocade 7800:
switch:admin>
portshow ipif ge0
Port: ge0
Interface IPv4 Address NetMask Effective MTU Flags
----------------------------------------------------------
0 192.168.0.20 255.255.255.0 1500 U R M
1 192.168.0.21 255.255.255.0 1500 U R M
Interface IPv6 Address Len Effective MTU Flags
---------------------------------------------------------------
2 fe80::205:1eff:fec3:e6b2 64 1500 U R M
3 2000::20 64 1500 U R M
4 2000::21 64 1500 U R M
5 2000::22 64 1500 U R M
Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running
N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp
switch:admin>
portshow iproute ge0
Port: ge0
IP Address Mask Gateway Metric Flags
-------------------------------------------------------------
192.42.0.0 255.255.255.0 192.168.0.250 0 U G
192.168.0.0 255.255.255.0 * 0 U C
192.168.0.10 255.255.255.255 * 0 U H L
192.168.0.11 255.255.255.255 * 0 U H L
192.168.0.21 255.255.255.255 * 0 U C
192.168.0.250 255.255.255.255 * 0 U H L
IPv6 Address Len Gateway Metric Flags
----------------------------------------------------------------
2000:: 64 * 0 U C
2000::10 128 * 0 U H L
2000::11 128 * 0 U H L
2000::1:250 128 * 0 U H L
2001:: 64 2000::1:250 0 U G
fe80:: 64 * 0 U C
ff01:: 32 * 0 U C
ff02:: 32 * 0 U C
Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static
L=LinkLayer(Arp)