Zoneobjectexpung – Dell POWEREDGE M1000E User Manual
Page 1055
Fabric OS Command Reference
1023
53-1001764-02
zoneObjectExpung
2
zoneObjectExpung
Expunges a zone object.
Synopsis
zoneObjectExpunge "objectName"
Description
Use this command to expunge a zone object. In addition to deleting the object, this command also
removes the object from the member lists of all other objects. After successful execution of this
command, the specified object no longer exists the database. You can use this command for all
zone object types, including cfg, zone, and alias.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change
to become effective, enable the configuration with the cfgEnable command.
Notes
When FCS policy is enabled, this command can be issued only from the primary FCS switch.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following operand:
"objectName"
The name of the object that you want to expunge. Quotation marks are
optional. This operand is required.
Examples
To create a configuration containing three zones:
switch:admin>
cfgshow
Defined configuration:
cfg: USA_cfg Red_zone; White_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Red_zone
1,0; loop1
zone: White_zone
1,3; 1,4
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
switch:admin>
zoneobjectexpunge "White_zone"
switch:admin>
cfgshow
Defined configuration:
cfg: USA_cfg Red_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Red_zone
1,0; loop1
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
See Also
cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow, zoneObjectCopy,
zoneObjectRename