Dell POWEREDGE M1000E - Manual (Page 138)

106 Fabric OS Command Reference
53-1001764-02
chassisDistribute
2
chassisDistribute
Distributes IP filter policies.
Synopsis chassisdistribute -db policy_db -fid FID | -domain domain_list [-force]
Description Use this command to manually distribute IP Filter policies. The behavior of this command depends
on whether Virtual Fabrics are enabled or disabled.
• In Virtual Fabric mode, this command distributes the IP filter policy databases from a specified
logical switch to all chassis that are connected through the logical switch on which the
command is issued.
• If Virtual fabrics are disabled, the IP filter policy databases are distributed to a specified list of
Domain IDs.
This command distributes the entire database and overwrites any existing data on the receiving
switches. The chassisDistribute command does not enforce FCS policy.
The target chassis or switches must be capable of accepting the distribution. The distribution is
aborted if one of the connected chassis or domains is configured to reject the distribution. Use the
fddCfg command to configure the fabric-wide policies that control distribution behavior.
The command output includes the following information:
FID Indicates whether Virtual Fabrics are enabled or not on the domain that
receives the distribution. If Virtual Fabrics are enabled, the FID is displayed,
and all logical switches which are part of the chassis are targeted to receive
the distribution.
DOMAIN Displays the Domain ID of the originating switch.
CHASSISWWN Displays the WWN of the originating chassis in Fabric OS v6.3.0 switches.
Displays the originating switch WWN in switches running earlier Fabric OS
versions.
CHASSISNAME Displays the name of the originating chassis..
SUPPORTED_DIST Displays yes if the distribution is supported. Displays no if the distribution is
not supported.
This command distributes IP Filter policies only. To distribute other security policies, use the
distribute command.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
-db policy_list Specifies the list of policy sets, also called security databases, to be
distributed. Currently, only the IPFILTER policy database can be distributed
with this command. The policy list must be enclosed in double quotation
marks; members must be separated by semicolons. The following operands
are exclusive: