Dell POWEREDGE M1000E - Manual (Page 889)

Fabric OS Command Reference 857
53-1001764-02
secPolicySave
2
secPolicySave
Saves a defined security policy to persistent memory.
Synopsis secpolicysave
Description Use this command to save a defined security policy to persistent memory. Secpolicysave saves the
modified SCC, DCC, and FCS policies to the Defined Security Policy Set on the local switch.
Notes This command is always a local switch operation. A fabric-wide consistency configuration does not
affect the behavior of this command.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Example To save a defined policy set to persistent memory:
switch:admin>
secpolicysave
secpolicysave command was completed successfully.
See Also fddCfg, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete,
secPolicyDump, secPolicyRemove, secStatsShow